Revitalise

How to use:

1. If your helmet has a visor, remove the visor completely from helmet.
2. Place a paper towel behind your lining (to stop overspray touching the foam)
3. Spray 8-12 sprays inside helmet onto internal linings & paddings.
4. If helmet lining/padding has leather, simply wipe away overspray with a damp paper towel.
5. Place helmet aside & allow Revitalise to work its magic for 2-3 hours.
6. Touch inside helmet linings/padding to ensure it is dry to the touch before wearing.
7. Test fit helmet to ensure fragrance will not make you feel sick, dizzy or nauseous before riding/driving.

Warnings:

1. If you have any exposed foam that you can see inside your helmet (behind the linings/padding) be sure to wipe dry any overspray immediately (hence placing we recommend placing a paper towel behind the lining).
2. We strongly recommend you follow above instructions, if for whatever reason you feel sick, dizzy or nauseous after using Revitalise & allowing it to dry out properly, we STRONGLY recommend you do NOT even attempt to ride or drive with your helmet. Remove internal linings & wash them & allow them to dry out, or simply let your helmet air out on its own.
3. Never over saturate your helmet with Revitalise as it is potent, one coat is usually enough, if you wish to apply a second coat, ensure the first coat is fully dry & do NOT use a hair dryer or heat gun to speed up the drying process.

How to use:

1. Allow your boots/shoes to air out, then depending on the size of your boots, spray 7-15 sprays directly inside each boot.
2. Wipe off any excess overspray from exterior of boot (if exterior is plastic, leather, PU leather, faux leather, vinyl, nubuck or suede, with a damp paper towel).
3. Place boots aside & allow Revitalise to work its magic for 2-3 hours.
4. Touch inside boots to ensure they are dry before wearing them again.
5. If you have really strong foot odour, a second application may be required, simply repeat above steps.

Revitalise will only work on absorbent fabrics, if your leather gloves do not have any fabric/fleecing inside them do not use Revitalise inside them as their will be nothing for Revitalise to penetrate.

How to use:

1. Spray 2-5 sprays inside each glove (the bigger the glove, the more sprays required).
2. Place gloves aside & allow Revitalise to work its magic for 3-4 hours.
3. Enjoy!

If inside your suit has any absorbent fabric (including all technical grade fabrics), Revitalise will work perfectly fine.

How to use:

1. Spray 20-40 sprays inside entire suit.
2. Hang suit & allow Revitalize to work its magic for 3-5 hours.
3. Enjoy!

How to use:

1. Empty out back pack.
2. Spray 10-15 sprays inside back pack making sure you spray soiled areas.
3. Close back pack & allow Revitalise to work its magic for 2-3 hours.
4. Enjoy!

Keep note: These potions are not designed to be used on leather, faux leather, PU leather, Vinyl, nubuck & suede as these materials are not absorbent.