Revitalise

How to use:

1. If your helmet has a visor, remove the visor completely from helmet as overspray may damage visor coatings & Pinlock inserts.
2. Spray 8-12 sprays inside helmet onto internal linings & paddings.
3. If helmet lining/padding has leather, simply wipe away overspray with a damp paper towel.
4. Place helmet aside & allow Revitalise to work its magic for 2-3 hours.
5. Touch inside helmet linings/padding to ensure it is dry to the touch. Once dry, wear helmet for at least 15 minutes before riding/driving to ensure the scent won’t make dizzy or nauseous & if your skin (face & head) feels warm or cool it means the alcohol content within Revitalise has not fully evaporated, remove helmet & allow more time for Revitalise to fully evaporate.

Warnings:

1. If you have any exposed foam that you can see inside your helmet (behind the linings/padding) be sure to wipe away dry any overspray immediately with a slightly damp (with water only) paper towel after spraying Revitalise inside your helmet.
2. We have tested Revitalise on various helmets, by spraying directly inside helmets & letting them sit for days with zero visible effect & touch/feel to the foam. HOWEVER we rather be safe than sorry & strongly suggest you wipe away any excess overspray immediately after using Revitalise.
3. We strongly recommend you follow above instructions, if for whatever reason you feel sick, dizzy, nauseous after using Revitalise & allowing it to dry out properly, we STRONGLY recommend you do NOT even attempt to ride or drive with your helmet. Remove internal linings & wash them & allow them to dry out, or simply let your helmet air out on its own.
4. Never over saturate your helmet with Revitalise as it is potent, one coat is usually enough, if you wish to apply a second coat, ensure the first coat is fully dry & do NOT use a hair dryer or heat gun to speed up the drying process.

Keep note: These potions are not designed to be used on leather, faux leather, PU leather, Vinyl, nubuck & suede as these materials are not absorbent. If your helmet has any of these materials be sure to wipe away any excess overspray with a damp paper towel.

How to use:

1. Allow your boots/shoes to air out, then depending on the size of your boots, spray 7-15 sprays directly inside each boot.
2. Wipe off any excess overspray from exterior of boot (if exterior is plastic, leather, PU leather, faux leather, vinyl, nubuck or suede, with a damp paper towel).
3. Place boots aside & allow Revitalise to work its magic for 2-3 hours.
4. Touch inside boots to ensure they are dry before wearing them again.
5. If you have really strong foot odor, a second application may be required, simply repeat above steps.

Keep note: If your feet feel warm after using Revitalise, it means the alcohol content within Revitalise has not fully evaporated. Remove your boots & allow them to air out/dry out longer. Do not use a hair dryer to speed up the drying process.

Revitalise will only work on absorbent fabrics, if your leather gloves do not have any fabric/fleecing inside them do not use Revitalise inside them as their will be nothing for Revitalise to penetrate.

How to use:

1. Spray 2-5 sprays inside each glove (the bigger the glove, the more sprays required).
2. Place gloves aside & allow Revitalise to work its magic for 3-4 hours.
3. Enjoy!

Keep note: If your hands feel warm after using Revitalise it means the alcohol content within Revitalise has not properly evaporated, remove your gloves & allow them to air out. Do not use a hair dryer to speed up the drying process.